VERI-DRY is a simple add on device that can be installed on any new or existing air conditioner or heat pump that converts it into a dedicated highly efficient moisture-removing dehumidifier.
Current whole house dehumidifiers available today have compressors, fans, refrigeration coils, filters and valves, resembling a secondary miniature air conditioning system. VERI-DRY utilizes the existing cooling system thereby eliminating costly installation and maintenance.
LOWER FIRST COST
Since there is no refrigeration system to buy, the VERI-DRY add on package is the most cost effective.
Typical whole house dehumidifiers have a maximum capacity of 130 pints per day. The VERI-DRY system installed on a 4 ton air conditioner has a capacity of 520 pints per day or 21 pounds per hour.
WON’T FREEZE THE COIL
Coil freezing is common on dehumidifiers and require de-frost circuitry. VERI-DRY ’s unique Coil-Temp controller allows the system to operate at any space temperature while maintaining a 34 degree coil, maximizing its moisture removing capabilities.
VERI-DRY requires no 120 volt power supply to operate it nor does it require inefficient defrost cycles. An advertised 130 pint per day whole house dehumidifier uses 10.6 amps @ 120 volts of electricity to operate. VERI-DRY uses .2 amps @ 24 volts.
Slowing down the fan speed has been implemented by most manufactures in an attempt to reduce humidity levels. This causes stratification and reduces comfort levels even further. With VERI-DRY, the blower speed is maintained at it’s maximum level creating dry air currents that remove moisture fast and economically.
INHIBITS MOLD GROWTH
Moisture and dampness are essential for mold and mildew to flourish. Controlling the humidity and moisture practically eliminates the possibility of any toxic or non-toxic mold to develop inside a building.
EXISTING AIR CONDITIONER
The air conditioner will continue to operate exactly as before. If the air conditioner is operating and the humidity controller tells the system there is a need to take extra moisture out of the air, the air conditioner continues to run and the VERI-DRY quietly switches into the dehumidification mode. When the humidity controller is satisfied, the air conditioner is returned to normal.
The VERI-DRY dehumidification system is can be retro-fitted to any size cooling system including large roof top equipment.
Since the VERI-DRY has no secondary compressor, fans, relays, valves or refrigeration devices, it’s life cycle far exceeds any other product on the market. A small 24 volt motor actuator is the only moving part regardless of system size.
The VERI-DRY system comes with a state of the art pc based programmable thermostat-humidistat humidity controller that mounts in place of the existing thermostat.
The VERI-DRY has one moving part, the damper control. No compressor, no evaporator coil, no reheat coil, no expansion valve, no hi & low pressure switches, no blower motor, virtually no maintenance and capacities to match the system size in tonnage.
VERI-DRY comes with a 5 year warranty on all parts and free labor the first year.